Product Description
Make it Yours! Choose the features you need for your build.
- Hans or Standard shoulder straps
- Clip-in or bolt-in lap belts
- Roller or EZ Adjusters on the lap belts
All 5.3 Harnesses feature the following:
- 5 Point Harness with 3″ belts
- SFI 16.1 Certified
- All Black Hardware
- EZ Adjusting shoulder straps
- Sewn in pads
- Removable sternum strap
Whether racing, running the dunes, or crawling the Rubicon, the 5.3 Harness will hold you in tight. This 3″, 5 point seat belt has sewn in pads for comfort, all black hardware for cool styling and EZ adjusters on the shoulders. The EZ adjusters allow you to adjust your shoulder straps quickly and even if they are dirty or muddy. The seat belt also has a removable sternum strap, and a red latch guard on the lap belt. The lap belt bolts in. The shoulder harness and crotch strap can either bolt down or wrap around a roll bar. SFI 16.1 certified for racing. Don’t know which SFI certification you need? Find out here.
MAKE IT YOURS! CHOOSE THE OPTIONS YOU NEED FOR YOUR BUILD.
Bolt in Tabs – The traditional tabs found on most harnesses. Can be bolted to the appropriate mounting location in your vehicle.
Clip in Tabs – Used along with a Eye Bolt Kit, these tabs have a release clip that allows you to quickly take the belt out of the vehicle (rather than having to unbolt it every time). Great for when you need to access the battery under the seat, or when removing the belts for cleaning.
Roller Adjuster – The traditional lap belt adjuster found on most harnesses. Can sometimes be difficult to use.
EZ-Adjuster – PRP’s new and improved style of adjuster. The EZ’s allow you to easily tighten and loosen the belts, even if they are dirty or muddy. These come standard on all the shoulder belts, but now you can add them onto the lap belts as well!
Standard Shoulders – Our standard 3″ Belts. Come with thick sewn-in pads that protect your neck from chafing against the belts.
HANS Shoulders – These shoulder belts are needed when using a HANS style head and neck restraint device. The belts have a shortened pad, which leads to the 3″ webbing that is folded over and sewn into a 2″ width. This allows the shoulder belts to retain their strength, and still be able to be secured into the shoulder pads of the device.
WARNING
Proper installation and consistent use of the 5 point harness restraint system is critical to your safety in event of accident. To reduce risk of serious injury or death:
- Follow vehicle manufacturers, and PRP Seats instructions and safety messages during installation and use of this product.
- Use all belts provided. Secure lap belt first; low and snug across hips. Sternum strap tight at chest line (min. 4” below neck). Adjust remaining straps per instructions and confirm fitment restrains user & provides safe clearance from wheel, dash, roll cage, etc.
- Inspect all components of the 5 point harness restraint system regularly & replace as indicated by accident, wear or abrasion. Replace no later than 2 years from date on SFI 16.1 tag.
- This 5 point competition restraint system is intended for UTV or other off-road vehicle-not replacement for FMVSS 209 restraints. Never use with child car seats or boosters.
Proposition 65
WARNING: Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
